What the Dual Clit Flicker actually is
The PinkCherry Dual Clit Flicker Cock Ring is a stretchy, dual-ring design with a full-size bullet vibrator built into the front. The two rings are meant to slip over the shaft and sit comfortably, while the bullet delivers steady vibration. You can flip the bullet upward to target a partner's outer sweet spots or angle it downward to focus on yours. The bullet also pops out, so you can use it on its own.
Because the rings are made from smooth, stretchy TPE, they flex to fit, but the catalog does not list exact inner diameters. If you need precise sizing, that information is not confirmed in the supplied details. The ring takes 1 AAA battery (sold separately), so have one on hand before you start.
Catalog facts at a glance
- PinkCherry Dual Clit Flicker Cock Ring: Dual-ring design with a full-size bullet vibrator in the center. The two rings help the toy stay in place during partnered play, while the bullet provides the vibration.

PinkCherry Dual Clit Flicker Cock Ring - PinkCherry Dual Clit Flicker Cock Ring: Made from smooth, stretchy TPE in PinkCherry's signature pink. TPE is flexible and soft, but it needs water-based lube and gentle cleaning to last.
- PinkCherry Dual Clit Flicker Cock Ring: Waterproof and easy to clean with warm soapy water or toy cleaner. You can wash it without worrying about the electronics, as long as you follow the cleaning steps below.
- PinkCherry Dual Clit Flicker Cock Ring: Takes 1 AAA battery (sold separately). No charging cable needed, but you'll want a spare battery for uninterrupted play.
How to put it on for dual stimulation
The order below follows the product's design: stretch, position, then adjust the bullet angle. Go slowly and check comfort at each step.
- 1. Insert the battery: Open the bullet compartment and add 1 AAA battery (sold separately). Close it securely. The catalog does not specify battery orientation, so check the markings inside the compartment if available.
- 2. Apply water-based lube: The TPE material pairs best with water-based lube. Apply a small amount to the inside of the rings and to yourself to help them slide on comfortably.
- 3. Stretch the rings into place: The dual-ring design is stretchy. Slide the rings over the shaft one at a time, settling them at the base. The flexible rings are meant to slip comfortably into place for a secure fit that stays put.
- 4. Angle the bullet: Flip the bullet upward to target a partner's outer sweet spots during partnered play, or angle it downward to focus on yours. Adjust before turning on the vibration for easier positioning.
- 5. Turn on and adjust: Switch on the bullet and adjust the ring or angle as needed. The catalog does not list multiple vibration speeds, so expect steady vibration rather than patterns.
Tips for couples and solo play
For couples, the upward angle lets the bullet buzz against a partner's clitoral area during penetration, while the rings keep the toy anchored. Try a position where the bullet rests naturally against the clitoris without pressing too hard. If it feels too intense, angle it slightly away or add a thin layer of water-based lube to reduce friction.
For solo sessions, the downward angle puts the flicker right where you want it. You can also pop the bullet out of the ring and use it as a standalone vibrator. The catalog mentions it can be paired with a favorite dildo or strap-on, so experiment with what feels good for you.
Because the rings are stretchy TPE, they may feel snug. If you feel numbness or discomfort, take the ring off and reposition. The catalog does not provide a maximum wear time, so use your own comfort as the guide.
Cleaning and storage that protect the TPE
The catalog gives clear care instructions: wash with warm soapy water or toy cleaner, and use water-based lube only. Follow these steps to keep the ring in good condition.
- Remove the bullet first: Pop the bullet out of the ring before washing. The bullet is the electronic part; the TPE ring can be washed more thoroughly on its own.
- Wash the ring: Use warm water and mild soap or a dedicated toy cleaner. Gently rub the TPE to remove lube and residue, then rinse well.
- Wipe the bullet: The bullet is waterproof, but the catalog only specifies washing the ring with soap and water. For the bullet, use a damp cloth or toy cleaner wipe, avoiding submerging it if you're unsure.
- Dry completely: Let both parts air-dry fully before reassembling. Moisture trapped between the ring and bullet can encourage bacteria.
- Store separately: Keep the TPE ring away from other TPE or silicone toys to prevent material interaction. Store in a cool, dry place, and remove the battery if you won't use it for a while.
Lube compatibility: stick with water-based
The catalog explicitly states the ring pairs best with water-based lube. Silicone-based lubes can degrade TPE over time, making the material tacky or causing it to break down. If you prefer silicone lube for other toys, keep it away from this ring. Water-based lube is also easier to clean off TPE, which helps the toy last longer.
What the supplied information leaves open
The catalog does not list exact ring diameters, vibration speed settings, or battery orientation. If fit is a concern, the stretchy TPE accommodates a range, but you won't find precise measurements here. Similarly, the bullet's controls are not detailed beyond on/off, so expect a simple steady vibration rather than multiple modes. For any missing specification, check the product packaging or contact the retailer before purchase.


